A usable route is more than the shortest line
For an agricultural journey, the useful question is not just which road reaches the postcode fastest. It is whether the complete machine can use the road, turn through the destination entrance and arrive without committing to a bridge or lane it cannot negotiate. A journey between the same two places may need a different route when a trailer or implement is attached.
This guide explains how to compare those choices in AgriNav. The examples are illustrative planning exercises, not reports of real journeys or assurances that a named road is suitable. The legal guides in this collection explain Great Britain rules separately from Northern Ireland; this article does not approve a vehicle or a route.
Record the rig you will actually drive
Start with the tractor in its road-going configuration. Record its measured width and height, its lawful road speed for the intended operation and its weight. A catalogue model can be a starting point, but tyres, loaders, ballast and attachments can change the machine you are taking onto the road. Correct the supplied details rather than relying on a model name.
Then add the trailer or implement. Record transport width, overall length and actual towed weight, including the load. A folded cultivator's working width is not its road width. A trailer's payload rating is not its laden weight, and the total combination weight is not just the weight of the goods. Keep manufacturer, axle, tyre and coupling limits alongside the measurements; route planning does not replace those checks.
AgriNav stores dimensions in metres and can display length in feet. Keep the measured value accurate when changing units: rounding down a height or width can turn a marginal clearance into a misleading apparent fit. If a critical measurement is unknown, find it before relying on a bridge or narrow entrance.
- Measure the widest and highest points in transport configuration.
- Include tractor, trailer, carried load and mounted equipment in the relevant weight checks.
- Confirm a lawful road speed for the complete combination, not just its transmission capability.
- Ask the destination which gate accepts agricultural machinery and whether there is room to turn.
Read Agri-Optimal as a comparison, not a guarantee
AgriNav compares routes using the entered machine and load, with a preference for useful main roads and bypasses over town-centre turns and single-track lanes. The suitability of the road and the time estimate both matter. A road with a longer distance can be the better option if it avoids several tight turns or a constrained approach.
Look at the actual route line, restrictions and reason given for the recommendation. An A-road label does not prove sufficient width everywhere, and a bypass can still have a bridge or a difficult exit. A reviewed journey is not evidence that an unrelated machine, load or destination entrance will fit. Check the complete route rather than assuming the recommendation replaces the driver's judgement.
If distinct alternatives are offered, compare their different corridors. Shared road sections are normal; two useful alternatives need not be entirely separate. Conversely, a second label on the same roads is not a meaningful alternative. If only one suitable route is available, there may be no second option to show.
Worked example: why an eight-mile road journey is not a car ETA
Take an illustrative tractor with a lawful configured road speed of 25 mph and no load reduction. Eight miles at a constant 25 mph takes 19.2 minutes, or 19 minutes 12 seconds. That is a travel-time floor for this example, not an arrival promise: it leaves no time for a turn, queue, stop or slower road section.
AgriNav uses the selected machine's speed and load-adjusted cruising speed. Its road-class baseline uses the full cruise speed on A roads and 85% on smaller roads, before further allowances. With six miles of A roads and two miles of smaller roads in this example, the moving-time calculation is 6 ÷ 25 hours plus 2 ÷ 21.25 hours: approximately 20 minutes 3 seconds. Junctions, corners, hills and traffic can extend that estimate.
These figures illustrate the calculation only; they are not measured results or a statement that all A roads permit 25 mph. The lowest applicable legal limit and the conditions still govern the actual drive. A speed-limit sign for ordinary traffic does not remove a lower limit that applies to the tractor or its equipment.
Worked example: the same tractor with a laden grain trailer
Now attach a grain trailer to that illustrative tractor. First check the actual trailer and combination weights, braking suitability and road-going dimensions. Enter the laden towed weight rather than the empty trailer's tare weight. A heavier load can change hill performance and stopping requirements even if the tractor's rated speed has not changed.
AgriNav reduces its cruise estimate for load and adds allowances for the road geometry and available hill information. Attaching equipment does not make a slower tractor travel faster. A load-adjusted cruise speed of 20 mph, if that were the result for a particular example, gives a bare eight-mile floor of 24 minutes before slower road classes or other allowances; this is a hypothetical speed, not a universal trailer factor.
Compare whether the chosen route still works for the longer combination. A trailer may cut inside the tractor's path on a bend and its rear may swing out. A tractor-only route review cannot establish clearance for every trailer. If the preferred corridor remains safe, towing need not force a detour, but a physical restriction takes precedence over a previous preference.
Worked example: a wide folded implement
For a folded implement, check transport width and projections separately. A road can have enough straight-line width but an unsuitable entrance or bridge approach. Before choosing between a direct lane and a longer main-road route, identify where the complete combination can pass opposing traffic and turn without using a soft verge or crossing a barrier.
A width-related legal limit, movement notice or attendant requirement is separate from AgriNav's estimate. Use the towing and overhang guide and the current official rules to establish which regime applies. Entering a width in an app is not police notification, and the absence of a warning is not an exemption.
If a restriction is uncertain, establish a place to stop or turn before the last narrow section. Contact the highway authority or destination for the missing information. Do not enter a confined lane simply because there is no restriction recorded on the map.
Closure coverage: missing information does not mean open
AgriNav checks available official disruption information and excludes matched known road closures from offered routes. Coverage is incomplete: the current located official-feed integration is primarily Traffic Wales. Do not treat it as a complete live register of England's local roads, Scotland or Northern Ireland, or infer that a route around Harleston has been checked against every local closure.
Check local highway-authority notices near departure and confirm access with the destination for time-sensitive deliveries. A roadworks notice is not always a full closure; a temporary lane arrangement may still leave too little room for a wide implement. A signed car diversion may be unsuitable for an agricultural combination.
If the road on the ground differs from the plan, follow the signs and stop safely to reassess. Temporary closures, bridge work and access changes can arise after a journey is planned. No map can certify that an unreported road is open or that a structure has sufficient capacity.
Before Start and while driving
Confirm the destination entrance, machine details and selected route before starting. Navigation needs a live location fix: a saved location that frames the map is not proof that the device is tracking you now. If the device cannot obtain a fix, resolve the location problem while parked rather than treating the map's initial centre as your position.
GPS speed and arrival estimates depend on usable device readings. Missing or stale readings should not be treated as live telemetry. Changes in real driving pace can affect the remaining estimate, but an ETA is never an instruction to accelerate or to recover lost time. Leave control of the vehicle ahead of the screen.
Plan a safe stopping place to review an unfamiliar diversion or change route. Keep lights and reflectors visible, check the trailer brakes and coupling, and secure the load before joining the road. The driver's walk-round and the real signs remain essential even when the route calculation succeeds.
Give feedback that can help distinguish timing from road suitability
After ending a journey in AgriNav, the route survey asks about the timing, the roads and the overall experience. Those are different questions. A late arrival caused by a long stop is not the same as a consistently optimistic moving-time estimate; a realistic ETA does not make a narrow bridge suitable.
If you report a problem, describe the location, the equipment configuration and what happened without putting yourself at risk to collect evidence. A useful note explains whether the problem was an incorrect entrance, a restriction, a turn that the trailer could not negotiate or a timing difference. Do not include another person's private information unnecessarily.
For a guide correction or support request, email help@agrinav.co.uk with the page title or journey context. Feedback is evidence to review, not automatic proof that a road should become preferred for every machine. Check the Privacy Policy for how journey and survey information is handled.
Official sources
Written from the official guidance and legislation below. Use the current consolidated legislation and seek advice where classification or exemptions are uncertain.